Metal Fabrication: Difference between revisions

From Berea Makerspace Wiki
Jump to navigation Jump to search
Fusonk (talk | contribs)
Clean up layout, link equipment pages, add finger brake, format plasma CNC steps
Line 1: Line 1:
<div>
== General Information ==
 
Metal fabrication equipment is located in the [[Metal Shop]]. This page covers what the Metal Fabrication orientation includes and links to each machine's page.
 
Report equipment issues in [[Slack]] in #general or #shop-metal.
 
== Orientation and Access ==
 
Training is required to use metal fabrication equipment. Check the [https://bereamakerspace.org/calendar event calendar] for upcoming orientations.
 
This orientation assumes you have completed [[New-member-orientation|New Member Orientation]].


== General Information ==
== Safety ==
</div>
 
<div>Metal Fabrication equipment can be found inside the [[Metal Shop]]. When using any equipment in the metal shop, make sure to wear all proper safety equipment.
* Wear the PPE required for each machine. See [[Metal Shop]] for shop-wide safety rules.
* Do not operate power equipment if you are impaired, in a hurry, tired, or not feeling well.
* Inspect the equipment before using it. Do not use a machine that is damaged or not in good working order.
* Stop and ask on Slack if you are unsure how to use a machine.
 
== Equipment ==
 
=== Metal Cutting Mitering Chop Saw ===
 
[[File:Metal Cutting Mitering Chop Saw.jpg|200px|right]]
 
Evolution Tool S355. See [[Metal Mitering Chop Saw]].
<div style="clear: both;"></div>
 
=== Metal Drill Press ===
 
[[File:Metal Drill Press.jpg|200px|right]]
 
Sears S-4390. See [[Metal Drill Press]].
<div style="clear: both;"></div>
 
=== Benchtop Grinder ===
 
[[File:Benchtop Grinder.jpg|200px|right]]
 
Hercules HE0511. See [[Benchtop Grinder]].
<div style="clear: both;"></div>
 
=== Knife Grinder, Sander, and Buffer ===


If you have any issues with Metal Shop equipment, the slack channels associated with this space include: #general, #shop-metal.
[[File:Knife Grinder, Sander & Buffer.jpg|200px|right]]
== Orientation ==


The order of this document is to give some basic information of what will happen in the Metal Shop during the training. This orientation assumes that they have gone through our general space orientation.<p>Do not operate any power equipment if you are under the influence of anything, in a hurry, are tired, or are not feeling well.</p>
Grizzly G1015. See [[Knife Grinder, Sander & Buffer]].
<p>Inspect the equipment before using it.</p>
<div style="clear: both;"></div>


== <span style="font-size: 24pt;" >Equipment</span> ==
=== Manual Milling Machine ===


== Metal Cutting Mitering Chop Saw ==
[[File:Manual Milling Machine Metal.jpg|200px|right]]
[[File:Metal Cutting Mitering Chop Saw.jpg|200px|right|middle]]


Precision Matthews PM-739M. See [[Manual Milling Machine]].
<div style="clear: both;"></div>


<p>'''How to use:'''</p>
=== Metal Brake (Press-Mounted Finger Brake) ===


== Metal Drill Press ==
[[File:Metal_Shop_Finger_Brake.jpg|200px|right|alt=Hydraulic press fitted with a SWAG Off Road finger brake.]]


<p>'''How to use:'''</p>
Harbor Freight 50-ton press fitted with a SWAG Off Road 30" Finger Brake DIY Builder Kit. See [https://www.swagoffroad.com/products/swag-30-finger-press-brake-diy-builder-kit SWAG Finger Brake Product and Assembly Information].
[[File:Metal Drill Press.jpg|200px|right|middle]]
<div style="clear: both;"></div>


== Benchtop Grinder ==
=== CNC Plasma Table ===


<p>'''How to use:'''</p>
[[File:CNC Plasma Table.jpg|200px|right]]
[[File:Benchtop Grinder.jpg|200px|right|middle]]


== Knife Grinder, Sander, and Buffer ==
Langmuir Systems CrossFire XR with a Lotos LTP5500D plasma cutter. See [[CNC Plasma Table]] for software details, consumables, troubleshooting, and maintenance.
<div style="clear: both;"></div>


<p>'''How to use:'''</p>
==== Setup ====
[[File:Knife Grinder, Sander & Buffer.jpg|200px|right|middle]]


== Manual Milling Machine ==
# Determine the size and type of material you will use.
# Create your design in a CAD program of your choice, such as LightBurn, Inkscape, Corel, or Adobe.
# Open SheetCam and import your design at the scale you created it.
# Position the drawing in the bottom left-hand side.
# Set up the cutting parameters for your material.
# Click '''Run Post Processor''' to create the G-code for the plasma table.
# Save the G-code to your USB drive.
# Align your material on the sheet bed.
# Attach the magnetic grounding lug to your material, away from where the design will be cut.


<p>'''How to use:'''</p>
==== Using the Machine ====
[[File:Manual Milling Machine Metal.jpg|200px|right|middle]]
== Plasma CNC Router ==


<p>'''How to use:'''</p>
# Open FireControl and use the green button to load your design.
'''Set-Up:'''
# Move to the place on the sheet where your design will be cut, and set the work area to zero.
*Determine the size and type of material you will be using.
# Set the jog speed to a reasonable rate. Move the plasma head around the work area to make sure it won't run into anything.
*Using a CAD Program of your choice (Lightburn, Inkscape, Corel, Adobe, ect.) create your design.
# Wear your PPE and close the weld curtain to protect other members.
*Open Sheet Cam, and import your design using the correct scaling that you created with your design.
# Make sure air pressure on the plasma torch controller is above 80 psi.
*You want your drawing position to be in the bottom left-hand side.
# Press '''Start''' to begin cutting.
*Set up the cutting parameters for your material.
# When you are sure the design is complete, close FireControl.
*Click the run post processor option to create the gcode for the plasma router.
*Save your gcode to your USB drive.<br>
*Align your material onto the sheet bed.
*Using the magnetic grounding lug, attach to your material out of the way where your designs will be cut.
'''Using the Machine:'''
*Open fire control and use the green button to load your design.
*Set your work area to zero, when you find a place you want to work on the sheet (Where your design will be cut on the sheet).
*Set the jog speed at a reasonable rate, move the plasma head around the work area to make sure the plasma head won't run into anything.
*Ensure you are in proper PPE and the weld curtain is closed to protect the other Makerspace members.
*Ensure air pressure is above 80psi on the plasma torch controller.
*Press the Start button to start the cutting process.
*When complete and you are sure the design is completed, close the Fire Control program.
<br>[[File:CNC Plasma Table.jpg|200px|right|middle]]

Revision as of 00:07, 16 November 2026

General Information

Metal fabrication equipment is located in the Metal Shop. This page covers what the Metal Fabrication orientation includes and links to each machine's page.

Report equipment issues in Slack in #general or #shop-metal.

Orientation and Access

Training is required to use metal fabrication equipment. Check the event calendar for upcoming orientations.

This orientation assumes you have completed New Member Orientation.

Safety

  • Wear the PPE required for each machine. See Metal Shop for shop-wide safety rules.
  • Do not operate power equipment if you are impaired, in a hurry, tired, or not feeling well.
  • Inspect the equipment before using it. Do not use a machine that is damaged or not in good working order.
  • Stop and ask on Slack if you are unsure how to use a machine.

Equipment

Metal Cutting Mitering Chop Saw

Evolution Tool S355. See Metal Mitering Chop Saw.

Metal Drill Press

Sears S-4390. See Metal Drill Press.

Benchtop Grinder

Hercules HE0511. See Benchtop Grinder.

Knife Grinder, Sander, and Buffer

Grizzly G1015. See Knife Grinder, Sander & Buffer.

Manual Milling Machine

Precision Matthews PM-739M. See Manual Milling Machine.

Metal Brake (Press-Mounted Finger Brake)

Hydraulic press fitted with a SWAG Off Road finger brake.

Harbor Freight 50-ton press fitted with a SWAG Off Road 30" Finger Brake DIY Builder Kit. See SWAG Finger Brake Product and Assembly Information.

CNC Plasma Table

Langmuir Systems CrossFire XR with a Lotos LTP5500D plasma cutter. See CNC Plasma Table for software details, consumables, troubleshooting, and maintenance.

Setup

  1. Determine the size and type of material you will use.
  2. Create your design in a CAD program of your choice, such as LightBurn, Inkscape, Corel, or Adobe.
  3. Open SheetCam and import your design at the scale you created it.
  4. Position the drawing in the bottom left-hand side.
  5. Set up the cutting parameters for your material.
  6. Click Run Post Processor to create the G-code for the plasma table.
  7. Save the G-code to your USB drive.
  8. Align your material on the sheet bed.
  9. Attach the magnetic grounding lug to your material, away from where the design will be cut.

Using the Machine

  1. Open FireControl and use the green button to load your design.
  2. Move to the place on the sheet where your design will be cut, and set the work area to zero.
  3. Set the jog speed to a reasonable rate. Move the plasma head around the work area to make sure it won't run into anything.
  4. Wear your PPE and close the weld curtain to protect other members.
  5. Make sure air pressure on the plasma torch controller is above 80 psi.
  6. Press Start to begin cutting.
  7. When you are sure the design is complete, close FireControl.