Metal Fabrication: Difference between revisions
Clean up layout, link equipment pages, add finger brake, format plasma CNC steps |
Clarify 80 psi is the compressor supply |
||
| Line 87: | Line 87: | ||
# Set the jog speed to a reasonable rate. Move the plasma head around the work area to make sure it won't run into anything. | # Set the jog speed to a reasonable rate. Move the plasma head around the work area to make sure it won't run into anything. | ||
# Wear your PPE and close the weld curtain to protect other members. | # Wear your PPE and close the weld curtain to protect other members. | ||
# Make sure air | # Make sure the air compressor is supplying at least 80 psi. | ||
# Press '''Start''' to begin cutting. | # Press '''Start''' to begin cutting. | ||
# When you are sure the design is complete, close FireControl. | # When you are sure the design is complete, close FireControl. | ||
Revision as of 01:22, 16 November 2026
General Information
Metal fabrication equipment is located in the Metal Shop. This page covers what the Metal Fabrication orientation includes and links to each machine's page.
Report equipment issues in Slack in #general or #shop-metal.
Orientation and Access
Training is required to use metal fabrication equipment. Check the event calendar for upcoming orientations.
This orientation assumes you have completed New Member Orientation.
Safety
- Wear the PPE required for each machine. See Metal Shop for shop-wide safety rules.
- Do not operate power equipment if you are impaired, in a hurry, tired, or not feeling well.
- Inspect the equipment before using it. Do not use a machine that is damaged or not in good working order.
- Stop and ask on Slack if you are unsure how to use a machine.
Equipment
Metal Cutting Mitering Chop Saw

Evolution Tool S355. See Metal Mitering Chop Saw.
Metal Drill Press

Sears S-4390. See Metal Drill Press.
Benchtop Grinder

Hercules HE0511. See Benchtop Grinder.
Knife Grinder, Sander, and Buffer

Grizzly G1015. See Knife Grinder, Sander & Buffer.
Manual Milling Machine

Precision Matthews PM-739M. See Manual Milling Machine.
Metal Brake (Press-Mounted Finger Brake)

Harbor Freight 50-ton press fitted with a SWAG Off Road 30" Finger Brake DIY Builder Kit. See SWAG Finger Brake Product and Assembly Information.
CNC Plasma Table

Langmuir Systems CrossFire XR with a Lotos LTP5500D plasma cutter. See CNC Plasma Table for software details, consumables, troubleshooting, and maintenance.
Setup
- Determine the size and type of material you will use.
- Create your design in a CAD program of your choice, such as LightBurn, Inkscape, Corel, or Adobe.
- Open SheetCam and import your design at the scale you created it.
- Position the drawing in the bottom left-hand side.
- Set up the cutting parameters for your material.
- Click Run Post Processor to create the G-code for the plasma table.
- Save the G-code to your USB drive.
- Align your material on the sheet bed.
- Attach the magnetic grounding lug to your material, away from where the design will be cut.
Using the Machine
- Open FireControl and use the green button to load your design.
- Move to the place on the sheet where your design will be cut, and set the work area to zero.
- Set the jog speed to a reasonable rate. Move the plasma head around the work area to make sure it won't run into anything.
- Wear your PPE and close the weld curtain to protect other members.
- Make sure the air compressor is supplying at least 80 psi.
- Press Start to begin cutting.
- When you are sure the design is complete, close FireControl.