Wood Shop: Difference between revisions

From Berea Makerspace Wiki
Jump to navigation Jump to search
← Older edit
Zapf (talk | contribs)
Interface administrators, Administrators
428 edits
VisualWikitext
Fusonk (talk | contribs)
332 edits
No edit summary
Clean up layout and link to Surfacing and Sanding Equipment
 
(49 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<div>
== General Information ==
 
The Wood Shop contains tools and machinery that are not suited to the [[Clean Room]] or [[Metal Shop]]. It has one large worktable for equipment setup, classes, and workshops.
 
Report equipment issues on Slack in #general, #shop-cnc, or #shop-wood.
 
== Orientation and Access ==
 
Training is required to use Wood Shop equipment. Check the [https://bereamakerspace.org/calendar event calendar] for upcoming orientations.
 
* See [[Saws]] for saw orientation requirements.
* See [[Surfacing and Sanding Equipment]] for orientation requirements for the planer, jointer, and spindle sander.
* See [[CNC Router]] for CNC router orientation requirements.
* If you are not authorized to use a machine that requires orientation or authorization, you may use it only under the '''direct supervision''' of an authorized member. See [[All Woodworking Equipment]] for the equipment list.
 
== Safety ==
 
=== Before Using Equipment ===
 
* Use only machines you have been trained to operate and feel comfortable using. If you are unsure what to do, '''stop and ask for help''' on Slack or email [mailto:info@bereamakerspace.org info@bereamakerspace.org].
* Do not use a machine that is not in good working order. Stop, unplug it, leave a note on the machine, and notify [mailto:info@bereamakerspace.org Makerspace leadership].
* Check each tool's adjustments before use. Do not assume it is set up correctly.
* Do not modify equipment. Discuss proposed improvements on Slack.
 
=== Clothing and Protective Equipment ===
 
* Wear closed-toe shoes and safety glasses.
* Tie back long hair and secure loose clothing.
* Remove rings.
* Do not wear gloves when operating power tools.
* Wear respiratory protection when appropriate for the work.
* Wear hearing protection for loud equipment or extended use.
 
=== Shared Work Area ===
 
* Keep floors clean, clear, and dry.
* Keep extension cords off the floor when they are not in use.
* Be aware of people around you while operating equipment. Do not approach someone while they are using equipment.
* Do not eat or drink around power tools.
* '''Do not put drinks or other liquids on cast iron surfaces.'''
 
=== Finishes and Waste ===
 
* '''Dispose of rags and paper towels used with oil-based or potentially flammable finishes in the oily waste can.'''
* Store finishes in the yellow fire cabinet.
 
== Equipment ==
 
<onlyinclude>
{| class="wikitable sortable" style="width: 100%"
|-
!Picture
!Equipment
!Manufacturer
!Model
!Status
!Resources
|-
|[[File:Planer.jpg|200px]]
|[[Planer]]
|Dewalt
|[[Planer|DW735x]]
|Operational
|
 
[https://www.dewalt.com/GLOBALBOM/QU/DW735X/1/Instruction_Manual/EN/N486408_DW735_NA.pdf Manual]
 
[https://www.youtube.com/watch?v=a3-mI0ScY20&t=666s How-To Video]
 
|-
|[[File:Floor Drill Press2.jpg|200px]]
|[[Drill Press|Floor Drill Press]]
|Grizzly
|[[Drill Press|G7945]]
|Operational
|
 
[https://cdn0.grizzly.com/manuals/g7945_m.pdf Manual]
 
|-
|[[File:Less Sawdust Jointer.jpg|200px]]
|[[Jointer]]
|Central Machinery
|[[Jointer|31849]]
|Operational
|
 
[https://www.manualslib.com/manual/65115/Central-Machinery-31849.html Manual]
 
[https://www.youtube.com/watch?v=OwbVIqOVMDk How to Use a Jointer]
 
|-
|[[File:CNC Machine.jpg|200px]]
|[[CNC Router]]
|AVID CNC PRO
|[[CNC Router|60120]]
|Operational
|
 
[https://www.youtube.com/watch?v=TqTHGEK6T6M Vectric V10 Tutorial: Getting Started]
 
[https://www.youtube.com/watch?v=wdQ-_hllmKY&t=1s CNC Router Bits - Tutorial and Review]
 
|-
|[[File:Router Table.jpg|200px]]
|[[Router Table]]
|JessEm
|[[Router Table|5625-20 3.5HP]]
|Operational
|


== General Information ==
[https://jessem.com/pages/product-manuals Manual]
</div>
 
<div>The Wood Shop encompasses tools and processes that don't fit well in either the [[Clean Room|Clean Room]] or [[Metal Shop|Metal Shop]]. There is one big worktable available here to set up equipment and gather for classes/workshops.
[https://www.youtube.com/watch?v=w3kCRkqsKG0 How-To Video]
 
|-
|[[File:Small Lathe.jpg|200px]]
|[[Small Lathe]]
|JWL
|[[Small Lathe|1015]]
|Operational
|
 
[https://jettools.com/media/akeneo_connector/asset_files/M/_/M_719100_JWL_1015_1015VS__Manual___Rev_B_abc0.pdf Manual]
 
|-
|[[File:Spindle Sander.jpg|200px]]
|[[Spindle Sander]]
|Ridgid
|[[Spindle Sander|EB44243]]
|Operational
|
 
[https://manuals.ttigroupna.com/system/files/162/original/EB44241_42_43_482_eng_05.pdf?2018 Manual]
 
|-
|[[File:Table Saw.jpg|200px]]
|[[Table Saw]]
|Sawstop PCS
|[[Table Saw|31230]]
|Operational
|
 
[https://www.sawstop.com/wp-content/uploads/2021/10/Owners-Manual-Professional-Cabinet-Saw-175.pdf Manual]


</div>
|-
<div>If you have any issues with Wood Shop equipment, the slack channels associated with this space include: #general, #shop-cnc, and #shop-wood
|[[File:Bandsaw.jpg|200px]]
== Access Policy ==
|[[Bandsaw]]
=== Saw Blades ===
|Rikon
* Use of the Saw Blades requires an orientation. Visit the Saw Blade page for details.
|[[Bandsaw|10-325]]
|Operational
|


=== Finishing Machines ===
[https://homeimprovementsupply.com/images/Rikon/PDFs/10-325_Manual.pdf Manual]
* Use of the finishing and surface preparation machines requires an orientation. Visit the Finishing Machines page for details.


=== CNC Machine ===
|-
* Use of the CNC machine requires an orientation. Visit the CNC Machine page for details.
|[[File:Miter Saw.jpg|200px]]
|[[Miter Saw]]
|Bosch
|[[Miter Saw|GCM12SD]]
|Operational
|


=== Drilling Machines ===
[https://www.bosch-professional.com/binary/manualsmedia/o198341v21_160992A0XM_1412.pdf Manual]
* Use of the drilling machines requires an orientation Visit the Drilling Machines page for details.


=== All Equipment ===
[https://www.youtube.com/watch?v=7fjHvYy5lkg Miter Saw for Beginners]
* Equipment requiring authorization may be operated by an unauthorized user only under the '''direct''' supervision of an authorized user.


== Wood Shop Area Safety ==
|-
|[[File:Lathe.jpg|200px]]
|[[Lathe]]
|Jet JWL
|[[Lathe|1015]]
|Operational; slated for removal
|


#Do not use any machine you are not trained on and are comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help on Berea Makerspace Slack, or email [mailto:info@bereamakerspace.org info@bereamakerspace.org].
[https://jettools.com/media/akeneo_connector/asset_files/M/_/M_719100_JWL_1015_1015VS__Manual___Rev_B_abc0.pdf Manual]
#Do not use any machine that is not in good working order. Stop, unplug, and leave a note on the machine and notify [mailto:info@bereamakerspace.org Makerspace leadership].
#Never assume a tool is properly adjusted; always check the tool before use.
#Make sure to wear closed-toe shoes.
#If you have long hair or loose clothing, make sure to tie it up before using any machinery.<br>
#Wear Safety Glasses.
#Never modify or hack any equipment. If you think an improvement can be made, discuss it on Slack!<br>


== Equipment List ==
|}
<br></div>
</onlyinclude>

Latest revision as of 23:26, 13 September 2026

General Information

The Wood Shop contains tools and machinery that are not suited to the Clean Room or Metal Shop. It has one large worktable for equipment setup, classes, and workshops.

Report equipment issues on Slack in #general, #shop-cnc, or #shop-wood.

Orientation and Access

Training is required to use Wood Shop equipment. Check the event calendar for upcoming orientations.

  • See Saws for saw orientation requirements.
  • See Surfacing and Sanding Equipment for orientation requirements for the planer, jointer, and spindle sander.
  • See CNC Router for CNC router orientation requirements.
  • If you are not authorized to use a machine that requires orientation or authorization, you may use it only under the direct supervision of an authorized member. See All Woodworking Equipment for the equipment list.

Safety

Before Using Equipment

  • Use only machines you have been trained to operate and feel comfortable using. If you are unsure what to do, stop and ask for help on Slack or email info@bereamakerspace.org.
  • Do not use a machine that is not in good working order. Stop, unplug it, leave a note on the machine, and notify Makerspace leadership.
  • Check each tool's adjustments before use. Do not assume it is set up correctly.
  • Do not modify equipment. Discuss proposed improvements on Slack.

Clothing and Protective Equipment

  • Wear closed-toe shoes and safety glasses.
  • Tie back long hair and secure loose clothing.
  • Remove rings.
  • Do not wear gloves when operating power tools.
  • Wear respiratory protection when appropriate for the work.
  • Wear hearing protection for loud equipment or extended use.

Shared Work Area

  • Keep floors clean, clear, and dry.
  • Keep extension cords off the floor when they are not in use.
  • Be aware of people around you while operating equipment. Do not approach someone while they are using equipment.
  • Do not eat or drink around power tools.
  • Do not put drinks or other liquids on cast iron surfaces.

Finishes and Waste

  • Dispose of rags and paper towels used with oil-based or potentially flammable finishes in the oily waste can.
  • Store finishes in the yellow fire cabinet.

Equipment

Picture Equipment Manufacturer Model Status Resources
Planer Dewalt DW735x Operational

Manual

How-To Video

Floor Drill Press Grizzly G7945 Operational

Manual

Jointer Central Machinery 31849 Operational

Manual

How to Use a Jointer

CNC Router AVID CNC PRO 60120 Operational

Vectric V10 Tutorial: Getting Started

CNC Router Bits - Tutorial and Review

Router Table JessEm 5625-20 3.5HP Operational

Manual

How-To Video

Small Lathe JWL 1015 Operational

Manual

Spindle Sander Ridgid EB44243 Operational

Manual

Table Saw Sawstop PCS 31230 Operational

Manual

Bandsaw Rikon 10-325 Operational

Manual

Miter Saw Bosch GCM12SD Operational

Manual

Miter Saw for Beginners

Lathe Jet JWL 1015 Operational; slated for removal

Manual

Retrieved from "https://wiki.bereamakerspace.org:443/index.php?title=Wood_Shop&oldid=12535"