CNC Router: Difference between revisions

Revision as of 03:58, 25 November 2024

The CNC machine can be found inside the Wood Shop. When using any equipment in the woodshop, make sure to wear all proper safety equipment.

If you have any issues with Wood Shop equipment, the slack channels associated with this space include: #general, #shop-cnc, and #shop-wood

The Cycle Start checklist is your friend. If you have verified all steps have been completed, you can hit Cycle Start.

Directions on how to use machine

List general information that can be found on this page, as well as what this page is for.

General Information about project/its process:

Materials Needed:

Photo of end result:

The average amount of time to complete the project:

Steps to complete project:

General Information about project/its process:

Materials Needed:

Photo of end result:

The average amount of time to complete the project:

Steps to complete project:

Materials Needed:

Photo of end result:

The average amount of time to complete the project:

Steps to complete project:

@@ Line 6: / Line 6: @@
 == Orientation ==
-The order of this document is to give some basic information of what will happen in the woodshop during the training. This orientation assumes that they have gone through our general space orientation.</div>
+=== First Steps<br> ===
-<div></div>
-This page will include video and textual links to supplement our CNC orientation, as well as the CAD / CAM instructionals we occasionally host. This is not a replacement to our orientation.<div></div>
+*Switch power on to both control and vfd (located on right side of the table)
-<div><p>Do not operate any power equipment if you are under the influence of anything, in a hurry, are tired, or are not feeling well.</p>
+*Visually inspect all sides of table to ensure nothing is in the way
-<p>Inspect the equipment before using it.</p>
+*Verify the e-stop on the table and the pendant are not pressed
+=== The Cycle Start Checklist ===
+The Cycle Start checklist ''is your friend''. If you have verified all steps have been completed, you can hit <span style="background-color: rgb(45, 194, 107);" >Cycle Start<span style="background-color: rgb(255, 255, 255);" >.</span></span>
 == <span>Equipment</span> ==