Fiber Laser: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
<div> | <div> | ||
== General Information == | == General Information == | ||
</div> | </div> | ||
<div>The Fiber Laser | <div>The Fiber Laser can be found inside the [[Clean Room]]. | ||
The Purpose of this page is to give a more in-depth look at the Fiber Laser. | The Purpose of this page is to give a more in-depth look at the Fiber Laser. | ||
| Line 11: | Line 10: | ||
== Orientation == | == Orientation == | ||
== | Note: Much of our orientation for the fiber laser is based off a base level of understanding gathered while taking our CO2 Laser orientation - we recommend you check out that page as well! | ||
=== Laser Overview === | |||
== | ==== Laser Control Box (Front) ==== | ||
[[File:WiselyControllerFront.jpg|300px|thumb|Wisely Controller - Front Face]] | |||
[[File: | |||
'''"Red Light" Button: '''Toggle Button that activates and deactivates the red dot pointer and framing from the laser head. '''This should always stay on.''' | |||
'''Power Switch: '''<span ></span>Vertical is power off and should be turned off after use to conserve the laser. Turn the key to the right to turn the unit on. Do not remove the key; if key is removed, then it is out of service and a sign will be placed at the station. | |||
'''E-Stop / Emergency Button:''' Immediately removes power to the laser head. Push in to activate and turn counterclockwise and pull out to deactivate. | |||
== Beginner Project == | == Beginner Project == | ||
Revision as of 03:40, 12 November 2024
General Information
The Purpose of this page is to give a more in-depth look at the Fiber Laser.
If you have any issues with Clean Room equipment, the slack channels associated with this space include: #general, ##general, #shop-3d-printing, and #shop-laser.
Orientation
Note: Much of our orientation for the fiber laser is based off a base level of understanding gathered while taking our CO2 Laser orientation - we recommend you check out that page as well!
Laser Overview
Laser Control Box (Front)
"Red Light" Button: Toggle Button that activates and deactivates the red dot pointer and framing from the laser head. This should always stay on.
Power Switch: Vertical is power off and should be turned off after use to conserve the laser. Turn the key to the right to turn the unit on. Do not remove the key; if key is removed, then it is out of service and a sign will be placed at the station.
E-Stop / Emergency Button: Immediately removes power to the laser head. Push in to activate and turn counterclockwise and pull out to deactivate.
Beginner Project
General Information about project/its process:
Machinery used:
Materials Needed:
Photo of end result:
The average amount of time to complete the project:
Steps to complete project:
Intermediate Projects
General Information about project/its process:
Machinery Used:
Materials Needed:
Photo of end result:
The average amount of time to complete the project:
Steps to complete project:
Advanced Projects
Materials Needed:
Machinery Used:
Photo of end result:
The average amount of time to complete the project:
Steps to complete project: