Finishing Machines

General Information

Finishing Machines can be found inside the Wood Shop. When using any equipment in the woodshop, make sure to wear all proper safety equipment.

If you have any issues with Wood Shop equipment, the slack channels associated with this space include: #general, #shop-cnc, and #shop-wood

Orientation

The order of this document is to give some basic information of what will happen in the woodshop during the training. This orientation assumes that they have gone through our general space orientation.

Do not operate any power equipment if you are under the influence of anything, in a hurry, are tired, or are not feeling well.

Inspect the equipment before using it.

General Safety Rules of the Woodshop

• Attire
  • Avoid loose clothes and hair
  • Remove rings
  • Wear close-toed shoes
  • Don't wear gloves when operating power tools
• Wear Safety Glasses
• Wear respiratory protection when appropriate
• Wear hearing protection for loud equipment or extended use
• Keep floors clean, clear, and dry
  • Keep extension cords off of the floor when not in use
• Don't throw oily rags in the trash can
• Store finishes in the yellow cabinet
• Don't eat and drink around power tools
• Be aware of people around you when using equipment, and don't approach others while they are using equipment

Equipment

Planer

Planers are used to flatten and smooth rough wood, that has already been through the jointer.

Jointer

Jointers are used to smooth and flatten one side of wood, and one of the edges to create a 90-degree angle. Its purpose is to help fix any bowing, cupping, or twisting in the wood.

Spindle Sander

A spindle sander helps to create a smooth finish on curves and other detail work on wood.