3D Printer: Difference between revisions

Latest revision as of 23:41, 9 October 2025

General Information

This page provides general information about the 3D Printers available at the makerspace, and directs makerspace members toward specific equipment pages for each printer. The 3D printers can be found inside the Clean Room.

If you have any issues with Clean Room equipment, the slack channels associated with this space include: #general, #shop-3d-printing, and #shop-laser.

Where do I find 3D models?

Recommended 3D Modeling Software

TinkerCAD - Browser based, cloud-based, approachable for makers of all ages
Fusion 360 - Cloud-based parametric 3D modeling software. Collaborative, powerful, free license available
LuBan - Has a number of fun features for scaling models to any size, lithographs, box making, extrusion, etc. We have a license for this software on-site, available on the PC located in the 3D Printing Area

FDM Printers

Bambu Lab

Requires Basic FDM Orientation

We have three Bambu Lab printers available:

Bambu Lab X1 Carbon (2 units)
- One unit is equipped with the AMS system for multicolor/multimaterial printing
- Build Volume: 256mm × 256mm × 256mm
- Nozzle Size: 0.4mm
- Materials Supported: PLA, PETG, ABS/ASA, Nylon, TPU, Soluble Support Materials
- Slicer Used: Bambu Studio

Bambu Lab H2D (1 unit)
- Dual-nozzle system for multi-material printing
- Build Volume: 325mm × 320mm × 325mm (single nozzle), 300mm × 320mm × 325mm (shared space)
- Nozzle Size: 0.4mm
- Materials Supported: PLA, PETG, ABS/ASA, Nylon, Carbon Fiber composites
- Slicer Used: Bambu Studio

See Page: Bambu Lab 3D Printer

Elegoo Orangestorm Giga

Requires Large Format Printing Orientation / Permission from Jess to use Currently still being integrated into the makerspace

Build Volume: 800mm × 800mm × 1000mm
Nozzle Size: 0.6mm (will be changed to 1.0mm before orientation)
Materials Supported: PLA, PETG
Slicer Used: OrcaSlicer

See Page: Elegoo Orangestorm Giga 3D Printer

Printer Status

See Page: printerstatus.bereamakerspace.org

@@ Line 1: / Line 1: @@
-<div>
+== General Information ==
+This page provides general information about the 3D Printers available at the makerspace, and directs makerspace members toward specific equipment pages for each printer. The 3D printers can be found inside the [[Clean Room]].
+If you have any issues with Clean Room equipment, the slack channels associated with this space include: #general, #shop-3d-printing, and #shop-laser.
+== ''Where do I find 3D models?'' ==
+* [https://www.thingiverse.com/ Thingiverse]
+* [https://www.thangs.com/ Thangs]
+* [https://www.printables.com/ Printables]
+* [https://grabcad.com/ GrabCAD]
+* [https://www.myminifactory.com/ MyMiniFactory]
+* [https://www.tinkercad.com/things TinkerCAD Things]
+* [https://nasa3d.arc.nasa.gov/ NASA 3D Resources]
+== Recommended 3D Modeling Software ==
+* [https://www.tinkercad.com/ TinkerCAD] - Browser based, cloud-based, approachable for makers of all ages
+* [https://www.autodesk.com/products/fusion-360/overview Fusion 360] - Cloud-based parametric 3D modeling software. Collaborative, powerful, free license available
+* [https://www.luban3d.com/ LuBan] - Has a number of fun features for scaling models to any size, lithographs, box making, extrusion, etc. We have a license for this software on-site, available on the PC located in the 3D Printing Area
+== FDM Printers ==
+=== Bambu Lab ===
-== General Information ==
+'''Requires Basic FDM Orientation'''
-</div>
-<div>The 3D printers can be found inside the [[Clean Room]].&nbsp;
-If you have any issues with Clean Room equipment, the slack channels associated with this space include: #general, ##general, #shop-3d-printing, and #shop-laser.
+We have three Bambu Lab printers available:
-== Orientation ==
+* '''Bambu Lab X1 Carbon (2 units)'''
+** One unit is equipped with the AMS system for multicolor/multimaterial printing
+** Build Volume: 256mm × 256mm × 256mm
+** Nozzle Size: 0.4mm
+** Materials Supported: PLA, PETG, ABS/ASA, Nylon, TPU, Soluble Support Materials
+** Slicer Used: Bambu Studio
-The order of this document is to give some basic information of what will happen in the Clean Room during the training. This orientation assumes that they have gone through our general space orientation.<p>Do not operate any power equipment if you are under the influence of anything, in a hurry, are tired, or are not feeling well.</p>
+* '''Bambu Lab H2D (1 unit)'''
-<p>Inspect the equipment before using it.</p>
+** Dual-nozzle system for multi-material printing
+** Build Volume: 325mm × 320mm × 325mm (single nozzle), 300mm × 320mm × 325mm (shared space)
+** Nozzle Size: 0.4mm
+** Materials Supported: PLA, PETG, ABS/ASA, Nylon, Carbon Fiber composites
+** Slicer Used: Bambu Studio
-== <span style="font-size: 24pt;">Equipment</span> ==
+See Page: [[Bambu_3D_Printer|Bambu Lab 3D Printer]]
-== Bambu 3D Printer ==
+=== Elegoo Orangestorm Giga ===
-Information Regarding Equipment, and picture of equipment to the left.</div>
-<div>
-[[File:BambuX1C.png|200px|right|middle]]
-== Bambu 3D Printer with AMS ==
+'''Requires Large Format Printing Orientation / Permission from Jess to use'''
-Information Regarding Equipment, and picture of equipment to the left.</div>
+'''Currently still being integrated into the makerspace'''
-<div>
-== Resin 3D Printer ==
+* Build Volume: 800mm × 800mm × 1000mm
-Information Regarding Equipment, and picture of equipment to the left.</div>
+* Nozzle Size: 0.6mm (will be changed to 1.0mm before orientation)
-<div><span style="text-decoration: underline; font-size: 14pt;">'''Washing Station for Resin 3D Prints'''</span></div>
+* Materials Supported: PLA, PETG
-<div>Information Regarding Equipment, and picture of equipment to the left.</div>
+* Slicer Used: OrcaSlicer
-<div><span style="text-decoration: underline; font-size: 14pt;">'''Curing Station for Resin 3D Prints'''</span></div>
-<div>Information Regarding Equipment, and picture of equipment to the left.</div>
-<div>
-== Creality Ender Plus 5 3D Printer ==
+See Page: [[Elegoo_Orangestorm_Giga_3d_Printer|Elegoo Orangestorm Giga 3D Printer]]
-Information Regarding Equipment, and picture of equipment to the left.</div>
-<div>
-== Creality CR 10 3D Printer ==
+== Printer Status ==
-Information Regarding Equipment, and picture of equipment to the left.</div>
+See Page: [//printerstatus.bereamakerspace.org printerstatus.bereamakerspace.org]