Jump to content

3D Printers

From Berea Makerspace Wiki
Revision as of 13:45, 11 June 2024 by Fusonk (talk | contribs) (Created page with "<div> == General Information == </div><div><p>The Clean Room is out "catch-all" room, encompassing tools and processes that don't fit well in either the Wood Shop or Metal Shop. Several work tables are available here to set up equipment, gather for classes or workshops, or just hang out!</p> == General Safety Rules of the Clean Room == #Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediat...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

General Information

The Clean Room is out "catch-all" room, encompassing tools and processes that don't fit well in either the Wood Shop or Metal Shop. Several work tables are available here to set up equipment, gather for classes or workshops, or just hang out!

General Safety Rules of the Clean Room

  1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help on Berea Makerspace slack, or email info@bereamakerspace.org.
  2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify Makerspace leadership.
  3. Never assume a tool is properly adjusted; always check the tool prior to use.
  4. Never modify or hack any equipment. If you think an improvement can be made, discuss it on slack!
Retrieved from "https://wiki.bereamakerspace.org:443/index.php?title=3D_Printers&oldid=179"